Leaderboard

String tree

BlueLou222

Newbie
Messages
9
Can I get away without using a string tree on a Warmoth Tele headstock? If not do I only need one on the b and e string or do I need two string trees?
 
I don't understand the question? A Warmoth Tele neck is the same as any other. It's going to depend on the tuners and nut. The best solution is to just use staggered tuners.
 
I haven't used string trees in years on any necks. As long as you have a well-crafted nut, you don't need them.
 
Even with a well cut nut, staggered inline tuners may not bind, may have good tone, but it's still annoyingly easy to pop a string out of the nut while bending another one.  String trees are an afterthought to fix a problem that can't be solved by properly cut nut or staggered tuners.

I may still put on black Tusq tree(s) at some point. Tusq for lubricity, black to stealth it.
 
I'm running a correctly-set-up black Tusq nut with locking tuners on a Tele neck and having no problems without a string tree.
 
I run them on the High E and B strings. I can be a bit brutal and they seem to need the extra help.
Of course I do a lot of chicken picken and string snaps so I guess it is just me plucking up and letting them fall that requires them.
 
I've tried to live without them on my telecasters and my fender XII.  even with staggered tuners I find that the high strings are popping out of the nut.  But then again I'm kinda hard on the instrument.
 
Thank you for the replies. The necknI ordered is going to have a tusq nut. I didn't even think about strings popping out. I thought they needed to be at a steeper angle to help with sustain or tone. I'll probably just use the one off the old neck.
Thanks everyone
 
That's good advice. Strings trees can cause tuning problems, and seeing as how they're rarely needed, it's just asking for trouble. Plus, it puts a hole in your headstock that you can't get rid of easily.
 
Back
Top