Schematic Requires Approval

[JimBeed]

Well ive corralated what was my original schematic along with a seymour duncan schematic that used same colour code as rio grande do, along with the seymour duncan jazz neck pickup to create a clearer 2nd version of my schematic, however i just wondered if any of you could check its all sound.

The push pull turns the rio grande from series to parrallel, or parallel to series (need to know which it would do, dont care which long as its one  :laughing7 which is also its volume control
the three way toggle is neck/both/bridge
the jazz neck has its own volume
and theres then a master tone after the three way toggle.
the notes in the top left are for the two parts of the rio grande colour coded to the wires.
the colours are what the wires are coloured from the powerbucker, apart from the bare which is coloured orange instead of grey as white was already grey
anymore questions ill answer. but help appreciated as always!

 

[JimBeed]

i know you wouldnt normally call the pickups in a humbucker 1st adn 2nd, instead ud call them north and south. but this was after a hour of work i did the labelling so the wire colours are the right way round. even if the names are a bit off.
i can tell most of it is correct as tehre are a fair few other diagrams with them, but its the  rio grande im more worried about, not so much about it not working, just not sure what one would be parrallel and which would be series on the push/pull pot, but i guess wiring it up could discover this myself really

 

[JimBeed]

Just confirmed with another few diagrams that ive got the wires all right for doing series parrallel on the push pull, and that the rest of the diagram is going to do what it should, so think im going to start a bit of soldering work