Nitro on top of Z-poxy

[dmraco]

Can nitro be sprayed on top of wood that has been treated with z-poxy??
Thanks

 

[Tonar8352]

That will work fine.

Press the Z-poxy into the pores, allow to dry overnight and then sand with 400 grit paper. Apply a second (or third)coat until you have a perfectly flat surface. The last coat can be thinned with alcohol and wiped on with a towel. The alcohol will evaporate leaving a glassy surface. Be sure you do NOT sand to the bare wood when sanding. Then finish with KTM9, de-waxed Shellac, lacquer or urethane

 

[dmraco]

As always...thank you.

 

[dmraco]

Tonar...do you recommend the 30 minute z-poxy???

 

[Tonar8352]

Sorry I have no experience with the product so the only thing I can go off of is the manufactures recommendations.