New Build - 70s Custom Ash/Rosewood Tele

[neverstock]

How does the Allen wrench figure into the pickup winding scenario you depict here?

I took off the base plate, and put the Allen Wrench through the center hole in both pickup bobbins, and put that in the drill. Rubber tubing or tape plus pressure holds the Allen wrench bend to the outside bobbin.

 

[PhilHill]

Way to get the job done Sir, my congrats.    :icon_thumright: :icon_thumright:

 

[rgand]

How does the Allen wrench figure into the pickup winding scenario you depict here?

I took off the base plate, and put the Allen Wrench through the center hole in both pickup bobbins, and put that in the drill. Rubber tubing or tape plus pressure holds the Allen wrench bend to the outside bobbin.

This is outstanding. So simple and effective. :icon_thumright:

 

[bagman67]

How does the Allen wrench figure into the pickup winding scenario you depict here?

I took off the base plate, and put the Allen Wrench through the center hole in both pickup bobbins, and put that in the drill. Rubber tubing or tape plus pressure holds the Allen wrench bend to the outside bobbin.

Very cool, thank you for explaining.

 

[Flagada_John52]

Hi!
Could you please tell me what the pole spacing is on the Fender CuNiFe WRHB? Is that 57mm?
I'm thinking about building a Telecaster Deluxe with these pickups and wonder which bridge I should be getting (Fender American Standard vs Narrow Strat vs Vintage Strat) - leaning towards the vintage strat which is 57mm so far.
Thanks a lot for your help!

 

[Quiksilver]

I'd like to know this also -- anyone?

 

[Rick]

What?