Jackson 3x3 headstock

[Ian1297]

Hi guys,
          I'm new to this forum and wondered if someone can help me out. I'm looking to build my dream V guitar with a copy of a Jackson 3x3 headstock.

like this one

http://www.ebay.com/itm/2005-Jackson-DXMGT-Guitar-Neck-Sharkfin-Inlays-GN-2486-/271435033065?pt=Guitar_Accessories&hash=item3f32c9e9e9

does anyone out there have a headstock like this?

cheers!

Ian

 

[bagman67]

Carvin's DC600 headstock is close, and is available on their bolt-necks if you want to go that route.  Alternatively, it may be possible for Warmoth to custom cut the headstock on a paddlehead neck, at an upcharge.  Phone to find out for sure.


http://www.carvinguitars.com/guitargallery/dc600

 

[swarfrat]

I'm not exactly sure how it works, but I suspect if you said "make me one of these" you might get close. But I'm pretty sure if you call up and say "Make me a Jackson headstock" the answer will be no.

 

[Ian1297]

Carvin's DC600 headstock is close, and is available on their bolt-necks if you want to go that route.  Alternatively, it may be possible for Warmoth to custom cut the headstock on a paddlehead neck, at an upcharge.  Phone to find out for sure.


http://www.carvinguitars.com/guitargallery/dc600

actually, I did look at these...I like Carvin necks a lot but not quite the over look I am going for!

cheers

Ian

 

[Ian1297]

I'm not exactly sure how it works, but I suspect if you said "make me one of these" you might get close. But I'm pretty sure if you call up and say "Make me a Jackson headstock" the answer will be no.

hi,
  I spoke with their customer service rep and he said all I needed to do was send a cut out template of the 3x3 headstock and they could apply it to the neck design I wanted. I have scoured the internet and found only necks for sale on ebay or a company in China that does knock of necks that are close but don't want to buy another neck to get close to the 3x3 headstock.

I will keep looking.Thanks lads for all the help!

Ian