Leaderboard

If I want a Gotoh 510, but a DIY paint ready body…

Messages
6
Would it be easier to have Warmoth install the studs and just do my best to tape them off when painting, or try to install the studs myself after painting?
 
It's pretty easy to hammer the studs in yourself. Personally, I'd complete the finish and then install the studs. After having done 3 unfinished to finished bodies, this is my preference.

If you put the studs in before you complete the finish, you'll have to tape over and protect the studs as your putting finish on the body. If you do the finish first, and then gently hammer in the studs, you won't have to worry about the studs getting finish material on it, and you'll reduce the likelihood of a non perfect finish around the studs.
 
either way works. I have them install the studs and then I tape over. Just one less thing to anxt over. The more anxiety I can outsource the better (for me.) YMMV
 
What kind of finish?

If you’re applying a poly I don’t think there’s any problem with installing studs post finish.

A thin nitro? A little riskier, but I’d still do it after
 
What kind of finish?

If you’re applying a poly I don’t think there’s any problem with installing studs post finish.

A thin nitro? A little riskier, but I’d still do it after
I was going to finish it with the Rustoleum can that says “clear satin.”
 
Back
Top