I have an SSS routed Strat body that currently has 3 single coils. The pickguard is wired using a harness from TFN. All connections come out of the harness to tails. The three pickups, the output and the wire to connect to the claw/ground. I'm installing a Li'l Screamin Demon in the bridge and using this diagram as a guide: http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=1h_2s_1v_2t_5w
I'm not doing any coil tapping or in/out phase, etc.
For the bridge PU I have a tail from the wiring harness that has a white and black wire. In the SSS setup the white wire of the bridge connected to the white wire of the tail (and to the switch) and the black wire from the PU to the black wire of the tail (and to ground).
Looking at the HSS diagram it looks like I would attach black from the mini hum to the white wire in the bridge tail since that goes to the 5-way switch.
Red and White from the mini-hum are easy, connect and tape off.
My question is how should I handle green and bare from the pickup and the black wire from the harness? I'm thinking green to the black wire and bare to the back of the pot. Or should I just take both green and bare to the black wire from the wiring harness since it all goes to ground eventually?
I'm not doing any coil tapping or in/out phase, etc.
For the bridge PU I have a tail from the wiring harness that has a white and black wire. In the SSS setup the white wire of the bridge connected to the white wire of the tail (and to the switch) and the black wire from the PU to the black wire of the tail (and to ground).
Looking at the HSS diagram it looks like I would attach black from the mini hum to the white wire in the bridge tail since that goes to the 5-way switch.
Red and White from the mini-hum are easy, connect and tape off.
My question is how should I handle green and bare from the pickup and the black wire from the harness? I'm thinking green to the black wire and bare to the back of the pot. Or should I just take both green and bare to the black wire from the wiring harness since it all goes to ground eventually?