HH strat push pull wiring

[Mandalie]

So I thought I ordered a regular 3 way HH pre wired harness with 2 tone and 1 volume. But they sent me a 3 way HH harness with 1 volume, 1 regular pot tone and 1 push pull tone... can someone help me out with a diagram? I thought I picked split shaft pots but I guess I picked it to be split... with sold shaft

 

[Rick]

If you ordered a harness then just ask the people you bought it from to give you a wiring diagram.  You need to ask them what the push pull pot does.  It might not do anything and it's a mistake.  I recently bought a wiring harness from 920d and they were pretty good folks to deal with.

 

[Mandalie]

That’s who I got it from.it says right on it that it’s for being splot. I sent them a message for a diagram. I’m thinking I only need to solder to the push pull and solder the ground for each humbuckers?

 

[Rick]

Mandy you should call them and speak in person to a human.  They will want to talk with you.

 

[Mandalie]

I talked to them and they keep sending me diagrams for totally different set ups.... I’m not too happy

 

[Rick]

What did they say the push pull pot was for?

 

[Mandalie]

They didn’t say. But apparently it was wired for 3 pickups and it was a 3 way switch

 

[Rick]

Send it back.  You ordered a HH with 3 way switching and you got an HH with 3 way switching and a push pull wired for SSS.  There's a disconnect here that doesn't make sense.

If you don't send it back, or they refuse, you need professional intervention.

Bring it to a luthier and he'll be able to either tell you what's up, or take what you got and wire it using what you got.  I'd do a TBX and use the push pull to do either out of phase or series.  There's a section here for luthiers.

http://www.unofficialwarmoth.com/index.php?board=9.0  Look for a guitar tech near you.

There's not much more an internet forum can do for you.

 

[pirate]

I also ordered one from 920D and did all my communicating via email, and they are great to deal with, quick responses, they asked questions, answered all of my newbie questions, explained everything. I'm sure they would give you a call if you asked, and it might be easier to get it all straightened out more easily this way?

Diagram link
https://920dcustom.com/pages/wiring-diagrams