Standard profile WARMOTH Maple/Rosewood Bass Neck, steel rods, 6105 frets, BML 17.5 tuner ream, Graph Tech Tusq XL Nut. Installed on my build (See Oct Guitar of Month thread pics) for about a month of playing in my home before I decided to swap to a different neck. Original cost of unfinished neck $210. Not looking to make profit from finishing, just recoup some of the cost of the near-new raw neck. Thinking $150 plus shipping.
Nitro lacquer vintage tint finish from with Stewmac aged clear and clear gloss. It's a rubbed satin finish not high sheen. Fender waterslide decal Replica 60's era, it is buried in lacquer fully level sanded. Hipshot Ultralites were installed and fit perfectly in the holes, highly recommended. If you don't like the finish for some reason, 20 min with a rag and a can of thinner and you are down to the original bare wood. Nut and frets are as-delivered from Warmoth, I did no nut slotting or fret dressing past the stock setup.
Note, the finish was kept off of the heel pocket which is mated precisely with a Warmoth Dinky J body. Guessing Warmoth full size J and maybe others are same heel.
Pics attached:
Nitro lacquer vintage tint finish from with Stewmac aged clear and clear gloss. It's a rubbed satin finish not high sheen. Fender waterslide decal Replica 60's era, it is buried in lacquer fully level sanded. Hipshot Ultralites were installed and fit perfectly in the holes, highly recommended. If you don't like the finish for some reason, 20 min with a rag and a can of thinner and you are down to the original bare wood. Nut and frets are as-delivered from Warmoth, I did no nut slotting or fret dressing past the stock setup.
Note, the finish was kept off of the heel pocket which is mated precisely with a Warmoth Dinky J body. Guessing Warmoth full size J and maybe others are same heel.
Pics attached:
