Mx481james
Junior Member
- Messages
- 69
I have pleaded with warmoth to please cut this slot to no avail. I ordered a extra light swamp ash split jazz master body in Mary Kay , roasted maple ,ebony fingerboard 24 3/4 conversion neck , All the hardware except the pickups. But still they say NO ! LOL
It's being routed with a strat three single coil setup and I want to run a five position switch , blade . I don't want to do a rotary switch. Years ago I trying to cut one of these and it didn't go well . I was talking to Spike at warmoth he suggested a plastic plate cover like on an Ibanez. He sent me a link where to get one. I really appreciate that but I don't want do use a cover plate .
Anyone have good luck cutting one of these? If so please share the procedure you did , thank you.
It's being routed with a strat three single coil setup and I want to run a five position switch , blade . I don't want to do a rotary switch. Years ago I trying to cut one of these and it didn't go well . I was talking to Spike at warmoth he suggested a plastic plate cover like on an Ibanez. He sent me a link where to get one. I really appreciate that but I don't want do use a cover plate .
Anyone have good luck cutting one of these? If so please share the procedure you did , thank you.