Leaderboard

Custom body build

AggieTreed

Junior Member
Messages
136
So after building a bass through Warmoth I decided to take the plunge and build my own custom body. I am scrapping my old Ibanez 7 string body and building a custom one. Here is what I have after a days work. http://www.flickr.com/photos/aggietreed/6814533120/in/photostream
http://www.flickr.com/photos/aggietreed/6814560696/in/photostream
 
After a day of routing, rasping, carving, and sanding here is what turned up!
http://www.flickr.com/photos/aggietreed/6816788742/in/photostream
http://www.flickr.com/photos/aggietreed/6816788458/in/photostream
 
That's turning out pretty damn cool...I was kinda skeptical at first glance, but I'm liking it.. :headbang1:
 
Alright well i just got done with the fine sanding and applied some sanding sealer!
http://www.flickr.com/photos/aggietreed/6965324385/in/photostream
 
Duuuuuuude, you need to get one of these to go on that, it's a prefect match...
mn1461A.jpg

:headbang1:
 
DangerousR6 said:
Duuuuuuude, you need to get one of these to go on that, it's a prefect match...
mn1461A.jpg

:headbang1:
Oh man that would be! I'm using my current Ibanez neck for it though
 
And now for a little stain....
 

Attachments

  • Photo Mar 08, 6 14 55 PM.jpg
    Photo Mar 08, 6 14 55 PM.jpg
    497.1 KB · Views: 23
  • Photo Mar 08, 6 15 08 PM.jpg
    Photo Mar 08, 6 15 08 PM.jpg
    629.7 KB · Views: 9
Ok, I masked off some of the body and did some painting today.
 

Attachments

  • Photo Mar 09, 11 59 25 AM.jpg
    Photo Mar 09, 11 59 25 AM.jpg
    824.5 KB · Views: 6
  • Photo Mar 09, 12 02 50 PM.jpg
    Photo Mar 09, 12 02 50 PM.jpg
    679.6 KB · Views: 6
Back
Top