Angled Warhead headstock?

[Mapleg4]

I've suggested this before, but what about an angled Warhead headstock?

 

[Cagey]

I'm a big fan of the Warhead headstock, but why angle it?

 

[Mapleg4]

I'm a big fan of the Warhead headstock, but why angle it?

I meant in order to get the truss rod access on the headstock instead of on the side, like the angled strat headstock.

 

[Cagey]

The "Pro" construction that has the side access adjustment is a Good Thing. Those necks are remarkably stable. Basically a "set it and forget it" truss rod. Plus, you don't have the inaccessible heel adjuster or the unsightly headstock adjuster. On top of all that, it allows for a wider variety of neck meats because you don't have to have a scarf joint to hold the headstock on. It really is a superior design.

 

[Mapleg4]

The "Pro" construction that has the side access adjustment is a Good Thing. Those necks are remarkably stable. Basically a "set it and forget it" truss rod. Plus, you don't have the inaccessible heel adjuster or the unsightly headstock adjuster. On top of all that, it allows for a wider variety of neck meats because you don't have to have a scarf joint to hold the headstock on. It really is a superior design.

At least when there's a floyd rose nut on it, nobody notices that there's no truss rod hole or cover on the headstock.

 

[Cagey]

True - I hadn't considered that as I'd rather take a beating than ruin a neck by installing a Floyd Rose locking nut.