Leaderboard

Recent content by screwtop

  1. S

    Neck heel width

    No problem - appreciate the input. :) After doing some more testing, 49 mm at the nut is a little big at the nut end of the pocket, so it probably should be 48 mm.  I just realised that this is the actual nut width of the SuperWide.  Anyway, more evidence that my SuperWide neck doesn't quite...
  2. S

    Neck heel width

    Oh, actually, equating 2+3/16" with 56 mm is 4 tenths of a mm off, not 4 hundredths: 56 mm - (2 + 3/16) inch -> mm 7/16 (exactly 0.4375) (That's Frink syntax.) I made another test pocket yesterday and I have to increase the heel width to 56.2 mm (from 55.56 mm) and the virtual nut width to 49...
  3. S

    Neck heel width

    Good thoughts, and as you say, 56 mm is certainly not 2+3/16" - I wonder which dimension they actually use on the factory floor.  If they are making them to a 56 mm spec, 56.2 mm wouldn't be too far off the mark.  However, if they really are supposed to be 2 3/16", that's 0.6 mm off!  It's worth...
  4. S

    Neck heel width

    Hi all, I have a Warmoth body and SuperWide neck, and was wondering about interchangeability with other guitars. The heel seems to measure larger than spec: 56.16 mm (2.211") at the heel of the neck itself, and 56.2 mm (2.213") across the neck pocket in the body.  This is considerably larger...
  5. S

    Good Fret Cutters & Fret Tang Nippers for Stainless Frets?

    Maybe it's heresy but I've had pretty good results using a Dremel with a cut-off wheel for cutting and shaping stainless steel fret wire.  Just work gradually and use both hands resting on a surface to give good stability and control.  And safety glasses, obviously!
  6. S

    Schaller 456 bridge: dull/buzzing B string

    Thanks! That's improved it considerably. I could feel some roughness in the channel, and used a variety of cheap diamond files (small but probably not quite as fine as they should be) to smooth it down. I should have mentioned that this is the 456 piezo model. After the initial filing I noticed...
  7. S

    Schaller 456 bridge: dull/buzzing B string

    I'm putting together an all-Warmoth VIP with Schaller 456 bridge, and I've noticed a strange dull/buzzy sound on the B string, almost a bit like a sitar.  It affects the string the whole way up, even on the final fret, and only that string, so I don't believe it's a problem with action/neck...
Back
Top