Recent content by Jamie John

Wow ! I had done a search of Right hand reverse and this guitar did not come up....so thanks for sharing this with me. I'm very surprised how much I like playing this guitar standing up. Do you feel the same about it ? With the strap on the short horn (on the top), it seems to send the guitar...

Had forgotten about the asymmetric neck profiles and their relevance to the right hand reverse necks opposed to the lefty neck. Thanks for that..good information.

The side dots are on the right handed side. Beyond that I don't know

A 680pF Capacitor with a 220kOhm resistor is what the Toneshapers website sells as the single coil treble bleed. Nextgenguitars sells a 820pF paired with a 220kOhm resistor for single coils - but I have not tried that one. Thanks about the copper ...it took a while. I really love those Fralin...

I did use Oxford Primer (white) then the Olympic White nitro followed by 10 or so Coates of clear Oxford Gloss. Oxford sprayed great , but the smell is so strong. The Crystalac Britetone is so much better as far as VOC's go (you can barely smell it) ,but was a tad trickier to spray with my Fuji...

Here is my "Hendrix like" build for a right handed player. Warmoth sold me a really nice piece of dark Rosewood for this one. '30's Pale yellow stain on the neck with Brite tone satin finish. Oxford nitro Olympic white and Clear gloss on the body. I filed away at the front side of the bottom...

Completely Agree- Warmoth has a Gem in this design. One concern I had with the 12 on the bottom was the Floyd Rose arm on the 6 string - But with a bit of blue loctite thread locker on the floyd arm, I have it just tight enough to move upwards and out of the way as you can see in the 12 string...

                                                                                          I have an EDS1275 12 from 1982 and always thought I would like the 12 on the bottom more. I was right. Since I never much do any serious picking on the 12 string , I can set the 6 to the most comfortable...

Logrinn  http://www.stewmac.com/Pickups_and_Electronics/Pedal_Kits_and_Parts/Mini_Toggle_Switches_SPDT.html I have the ON/OFF/ON Switch . I have another double neck and you can have both necks on at the same time ,but I never really bother with that.

Here is the Jangle of the bridge and neck single coils (I wired the centre position of the switch tis way instead of the traditional middle pickup only position).Lots of old school Jangle here with the nickel flat wound pyramid strings. https://www.youtube.com/watch?v=uWYkYpDZSC8

here is the 6 string of the double neck with overdrive..https://www.youtube.com/watch?v=6v6ifQvJvHM

1.Shielding-I had to go back and dig deeper to allow wires to go under the pickups and pots. 2.Shielding,Seymour pickups ,Neck selector switch, and 5 way superswitch (1 card per neck) 3.Emerson Paper in oil cap for 12/ Orange drop for 6 string 4.Shims for a 20" radius on Floyd Rose 5.470k Ohm...

Thanks for the many kind words on the doublecaster. Many have asked for more pics/info. -Under which heading should I post this. - (New to the forum stuff)

I've used and liked stew-mac Orange .http://www.stewmac.com/Materials_and_Supplies/Finishing_Supplies/Colors_and_Tints_and_Stains/ColorTone_Liquid_Stains.html