Doner Designs
Junior Member
- Messages
- 47
Show us your control cavity guts - simple, complex, sexy, etc!
This one is a four band Audere noise cancelling preamp. It has five modules. One is for the tone controls and the other four, along with the four phantom coils, contain the noise cancellation circuitry. It feeds 3 pairs of single coils with a possible 63 coil combinations, all of which are noiseless.
I wasn't sure if it would fit the cavity but it did. I had hoped to add a switch to bypass the phantom coil circuits but it would have needed a 6 pole switch and would have nearly doubled the wiring. I have another similar preamp with a bypass and found it to be very transparent so opted not to have a bypass switch on this one.
This one is a four band Audere noise cancelling preamp. It has five modules. One is for the tone controls and the other four, along with the four phantom coils, contain the noise cancellation circuitry. It feeds 3 pairs of single coils with a possible 63 coil combinations, all of which are noiseless.
I wasn't sure if it would fit the cavity but it did. I had hoped to add a switch to bypass the phantom coil circuits but it would have needed a 6 pole switch and would have nearly doubled the wiring. I have another similar preamp with a bypass and found it to be very transparent so opted not to have a bypass switch on this one.