tele routing

[vtpcnk]

in warmoth tele bodies are the routes between the control cavity and the pickup cavities already routed?

or is that to be done by the buyer or the tech that the buyer goes to?

appreciate the feedback.

 

[Super Turbo Deluxe Custom]

They do it.

 

[vtpcnk]

any pictorial representation of how the internal routing is done between the pickup cavities and the control cavities on a tele thinline?

 

[tfarny]

It's just a hole they drill from pickup cavity to control cavity. Not much to look at.

 

[Super Turbo Deluxe Custom]

Unlike the Strat, where all pickup wires must go through the bridge p'up route, each one has it's own path to the control cavity.

 

[vtpcnk]

so you pretty much need two holes - from the control cavity to each pickup cavity?

 

[Super Turbo Deluxe Custom]

so you pretty much need two holes - from the control cavity to each pickup cavity?

We'll yeah, but they drill 'em.

 

[vtpcnk]

are the holes visible here - in the side shot :
http://www.warmoth.com/Showcase/ShowcaseItem.aspx?i=pt1499&Body=2&Path=Body

so from where is it drilled? from the pickup cavity or control cavity?

it looks like a long way from the neck to the control cavity though.

 

[vtpcnk]

the issue is that i have a thinline body which came without the interconnecting holes between the pickup and control cavities.

so is the routing normally done before the top cap is glued in. or after the top has been attached?

 

[Super Turbo Deluxe Custom]

Don't know when it's done, but always call them first and let them resolve any issue.