JCizzle
Senior Member
- Messages
- 423
After long delays caused by lack of tools, availability, lack of skill, and a lot of traveling, she is finally ready. I don't have all the nerd specs off the top of my head, but I'll do my best. Contoured heel, walnut wood, Bareknuckles (Abraxas and '59 Veneer!), compound radius neck, the biggest frets they had (SS), umm, what else....well, just ask me if you're curious!
Dangerousr6 did the truss rod cover and neckplate.
Tipperman suggested the walnut wood!
And not to embarrass him too much, but can't thank Cagey enough. Not only did he do the fretwork on my neck, but he sent me two wire care packaged because I'm limited in what I can find out here and also answered a ton of questions I had. Also, not that he needs it but I stand by his work and recommend his services to any other noobs on here.
The sun was going down already so the quality isn't as great, but I did make an effort to go outside and get some photos.
Dangerousr6 did the truss rod cover and neckplate.
Tipperman suggested the walnut wood!
And not to embarrass him too much, but can't thank Cagey enough. Not only did he do the fretwork on my neck, but he sent me two wire care packaged because I'm limited in what I can find out here and also answered a ton of questions I had. Also, not that he needs it but I stand by his work and recommend his services to any other noobs on here.
The sun was going down already so the quality isn't as great, but I did make an effort to go outside and get some photos.







