LushTone
Senior Member
- Messages
- 497
25" scale conversion neck with a strat heel
quartersawn maple, rosewood board
fatback profile
1 11/16" nut
12" radius
22 stainless 6105 frets
no inlays, side dots only
matching rosewood headstock overlay (cherry on top)
DIY burnish to 2000 grit and hand-rubbed with BLO
(Gotoh 16:1 tuners)
The body is a mahogany Warmoth chambered strat with a quilted maple top, finished with a clear to blue dye gloss. Loaded into it are an Emg HA in the neck and an 85 in the bridge (volume/tone/tone). I love Emgs.
**LATER UPGRADES: I later replaced the GraphTech bridge (though better than Gotoh) with a custom ebony/bone bridge that further improved the tone and is my favorite part. Also, I changed all bridge mounting hardware to black.
Anyway, here's the pictures!
quartersawn maple, rosewood board
fatback profile
1 11/16" nut
12" radius
22 stainless 6105 frets
no inlays, side dots only
matching rosewood headstock overlay (cherry on top)
DIY burnish to 2000 grit and hand-rubbed with BLO
(Gotoh 16:1 tuners)
The body is a mahogany Warmoth chambered strat with a quilted maple top, finished with a clear to blue dye gloss. Loaded into it are an Emg HA in the neck and an 85 in the bridge (volume/tone/tone). I love Emgs.
**LATER UPGRADES: I later replaced the GraphTech bridge (though better than Gotoh) with a custom ebony/bone bridge that further improved the tone and is my favorite part. Also, I changed all bridge mounting hardware to black.
Anyway, here's the pictures!