joelavely
Junior Member
- Messages
- 30
USACG BODY: Ordered this from USACG in 2014, received in January 2015. One piece swamp ash, lightweight at 3 lbs. 13 oz. Routed for 2-hole tremolo (I have a Hipshot in there), HSH pickup routes, USACG finished it in Cherry Burst. Extremely clean condition...maybe some swirlies, but no dings, etc. Pickguard and trem claw included for $550 shipped, no hardware, neck, or anything other than the body, pickguard and trem claw.
If you want any of the other items shown here (neck, pickups, Hipshot bridge, etc.) I'm open to parting those out as well. Hipshot bridge can be included for $50.
In the last pic, you can see where I was going for the "two strap buttons on the bottom makes it easier to stand the guitar alone" idea, and one of the strap button screws snapped off in the guitar.
$375 shipped
USACG NECK: Back from when USACG was independent and put out top-notch products. I ordered or received the neck in early 2015 and intended to use it in a build, but never got to that specific build, so selling now. Specs:
25.5" scale
12" radius
1.75" nut
6100 frets
Fat Back profile, roughly 0.94-1.0
MOP inlays
2-piece construction
Rolled edges
Never sanded, finished, stained, etc., so still has some "fuzz" on it.
My notes say drilled for Kluson tuners, haven't ever tried them at all so can't swear on that.
In the last pic, I read 17263, not sure what that means. "Lavely" is my name after that.
$325 shipped
Untitled by joelavely, on Flickr
Untitled by joelavely, on Flickr
Untitled by joelavely, on Flickr
Untitled by joelavely, on Flickr
Untitled by joelavely, on Flickr
Untitled by joelavely, on Flickr
Untitled by joelavely, on Flickr
Untitled by joelavely, on Flickr
Untitled by joelavely, on Flickr
If you want any of the other items shown here (neck, pickups, Hipshot bridge, etc.) I'm open to parting those out as well. Hipshot bridge can be included for $50.
In the last pic, you can see where I was going for the "two strap buttons on the bottom makes it easier to stand the guitar alone" idea, and one of the strap button screws snapped off in the guitar.
$375 shipped
USACG NECK: Back from when USACG was independent and put out top-notch products. I ordered or received the neck in early 2015 and intended to use it in a build, but never got to that specific build, so selling now. Specs:
25.5" scale
12" radius
1.75" nut
6100 frets
Fat Back profile, roughly 0.94-1.0
MOP inlays
2-piece construction
Rolled edges
Never sanded, finished, stained, etc., so still has some "fuzz" on it.
My notes say drilled for Kluson tuners, haven't ever tried them at all so can't swear on that.
In the last pic, I read 17263, not sure what that means. "Lavely" is my name after that.
$325 shipped
Untitled by joelavely, on FlickrUntitled by joelavely, on FlickrUntitled by joelavely, on FlickrUntitled by joelavely, on FlickrUntitled by joelavely, on FlickrUntitled by joelavely, on FlickrUntitled by joelavely, on FlickrUntitled by joelavely, on FlickrUntitled by joelavely, on Flickr
Last edited:
