Big problem with single coil toggleswitch!

[Cederick]

The guitar I'm working on right now is HSH, and I want the single coil to be toggled by an on off miniswitch (well, on-on)

So I'm stuck at where the switch turns off ALL PICKUPS, even tho it's not even connected to the others...

Both humbuckers goes to individual miniswitches for series/parallell/split or something like that, and then to a 3-way switch.
The single coil is supposed to be separate from those, and be able to turn it on and off in any of the humbuckers options...

And I simply dont get it! The singlecoil is connected to the miniswitch and then it's going straight to the output.

Is it a grounding problem?! Or have I just soldered it all incorrectly? :help:

 

[stratamania]

The middle lug of the volume pot should go to the output Jack as normal.

The output of the 3 way switch and the Middle pickup connects to the left lug of the volume pot.

And the ground of the Middle pickup to ground.

 

[Cederick]

Thansk, but after some experiments I actually got it to work, except that when the volume is down the mid pickup cannot be heart at all, even tho it's not even connected to the volum pot...

My idea was to have it entirerly indipendent of the others, and it kinda works, except that I can't play the middle pickup only. Not a biggie, since I'm not a big fan of middle singlecoils alone, so this might actually work

Now onto the tone pot I have been troubling around with in another thread  :toothy12: !