Recent content by Heft

Is this better? I really appreciate all this help!

There are for sure times I want to do that. But I have a vision and a dream :).

The pickups I have don't support this. This is the schematic without phase reverse. I just edited the image. One of the volumes was missing a wire.

Here is the final diagram for future readers.

Thanks

Thanks. I will keep it to one thread from now on. Does this look right?

OK I made those changes. Just to be clear, the top of volume and tone refer to the top pot of a dual ganged pot. Essentially its own pot.

It will effect both pickups then wont it?

I want 250k pots for the single coil and 500k pots for the HB. The idea is to have a resistor bleeding some current and helping achieve that. Is this what you meant?

Is this more correct? I'm trying to wire it so that each pickup goes to a seperate stereo channel. I wanted phase reverse when using the pickups together. (I can live without that)

Before I get out the soldering Iron could someone give this a once over? It's a 3-way H-S with stereo, dual ganged pots for master stereo volume and tone. It also has out of phase. Thanks in advance!

This is the push pull: https://www.opentip.com/Bourns-R-VB2-Potentiometer-Bourns-Audio-Solid-Shaft-Dual-Mini-Push-Pull-p-1620544_CED-R-VB2-250KAPPSS.html?ats=gs&srsltid=AfmBOorUDDp91dy_jcgyd6O06A3MTV1XD49X-cuK5i0gi6ngiOl80u1EdHo This is the ganged pot...

The stewmac is water based which is a bit more costly than the regular home depot stuff, but your point still stands.

My stewmax membership expired. The only thing I need in the foreseeable future from them is some wipe on poly colortone. Is the minwax water based stuff virtually the same? I want to clearcoat basswood satin. Thanks!