Heft's latest activity
-
Hello, I know there are a lot of these threads out there but most people say to get one at Harbor Freight. Unfortunately I live in... -
Heft replied to the thread Coil tap Vs Coil split.yeah, I want the humbucker to split into basically single coil mode. I want the quarter pounder single coil to loose some of its power...
-
A coil split humbucker is not a coil tapped single coil pickup. Coil split (some people get this wrong and call it coil tap) on a...
-
Not much at all. Basically the same wiring, but you’ll have to tell us which manufacturer it is and if it’s 3 or 4 conductor on the Hb...
-
Which pickup specifically you are asking about would also help. The wiring is likely not quite the same if swapping one for the other...
-
I fully agree with the explanation of@supertruper1988 . The wiring to split a 59/custom is entirely different to tapping a Quarter...
-
Exactly ... what switching do you want
-
For those for whom it may not be clear, just to clarify the grid of @Hodgo A, B, C & D are the common terminals for each pole of a super...
-
A - Vol pot B - Jumper to A common C - Ground D - Not connected 1 Humbucker North 2 Humbucker N/S Finish 3 Humbucker...
-
Heft replied to the thread Coil tap Vs Coil split.Thanks that helps a lot!
-
Heft replied to the thread Coil tap Vs Coil split.Just to clear up what I want, 1) bridge humbucker, 2) bridge humbucker (as split or parallel), 3) both full, 4) neck tapped, 5) neck full.
-
Heft replied to the thread Coil tap Vs Coil split.No, I want to replace 2 humbuckers with one quarter pounder and one 59/custom. The quarter pounder is the single coil tapped (neck)...
-
Heft replied to the thread Coil tap Vs Coil split.I'm looking at Seymour Duncan's for both. Probably a 59/custom and a quarter pounder will be what I go with.
-
Hello, I'm wondering if I can sub a tapped Seymour Duncan single coil for a coil split humbucker on a 5 way super switch. Anyone have...
