Heft's latest activity
-
That looks cleaner. -
Heft replied to the thread Could you check my work?.Is this better? I really appreciate all this help!
-
-
Heft replied to the thread Could you check my work?.There are for sure times I want to do that. But I have a vision and a dream :).
-
Heft replied to the thread Could you check my work?.The pickups I have don't support this. This is the schematic without phase reverse. I just edited the image. One of the volumes was...
-
-
Good spot. It could stay where it is or be moved but the following needs to be done. In any event, which would be better if the pickup...
-
There is a problem with the phase reverse switch. When you reverse the phase of the pickup, the output of volume control is shorted to...
-
-
Heft replied to the thread Could you check my work?.Thanks
-
The rest looks okay, but move resistor R1 to the left outside lug of the top vol pot and the other end of R1 to ground, probably on the...
-
Notwithstanding my earlier comments in another thread regarding practicality. Here is what currently would need to be done to fix the...
-
Heft replied to the thread Could you check my work?.Thanks. I will keep it to one thread from now on. Does this look right?
-
-
What will? The "top volume" still does nothing when you turn it, the wiper is not connected. And the more I think about it: You don't...
-
Heft replied to the thread Could you check my work?.OK I made those changes. Just to be clear, the top of volume and tone refer to the top pot of a dual ganged pot. Essentially its own pot.
-
-
Heft replied to the thread Could you check my work?.It will effect both pickups then wont it?
-
Heft replied to the thread Could you check my work?.I want 250k pots for the single coil and 500k pots for the HB. The idea is to have a resistor bleeding some current and helping achieve...
-
